Home - Product - OSD - Labeling

Labeling

Contact Us

BR300 Astrolabe Labeling Machine

1

Working Principle:

The labeled bottles enter the conveyor belt and are sorted by the bottle sorting wheel at a certain distance before being transported forward by the conveyor belt. When reaching the measuring material electric eye, the measuring material electric eye senses the bottle and immediately sends a signal to the label feeder for labeling. The bottle passes through the labeling plate and is labeled. At the same time, the bottle winding belt rotates the bottle to roll the label onto the circumference of the bottle, and the bottom paper is rewound. When the electric eye detects the end of the label, it sends a stop signal to the label feeder to complete the labeling process. After labeling, an optional printing machine or coding machine can be used to print three batches. In the future, a visual inspection system can be installed to detect label detection and the presence of Phase III inspection. Any non-conforming products can be promptly removed to ensure the quality of the final product.

Applicable specifications Bottle body/Ф25~Ф98mm; H: 45mm~200 mm
Applicable label width 16mm~150mm
Label roll outside diameter Ф340mm~400mm; Inside diameter Ф76.2mm
Label precision ±0.5mm (not considering the error between the labeled material and the label)
Production speed Maximum speed 300 bottles/minute (depending on  bottle size and label length)
Power source AC220V~(50/61Hz)
Power 2.0kW
Air pressure 0.5MPa-0.7MPa
Air consumption 100L/min clean air
Equipment weight About 350Kg
More Products
Quick Contact
Send Us a Message​