1. Confirm that the equipment is in good condition.
2. The installation of public facilities is correct.
3. Install the punch die
(1)Open the glass door and remove the discharge device.
(2)Clean the working surface, mold holes, installed molds, and specialized equipment of the turntable piece by piece.
(3)Wipe the periphery of the middle mold with oil, gently drive the middle mold into the mold ring in sequence with a special rod, and tighten the fastening screws on the side of the turntable. After installation, use a knife edge ruler to check whether each middle mold is installed in place on the turntable
(4)For the installation of the lower punch, first apply a layer of oil to the lower punch, then install it in the lower mold hole in sequence. After installation, install the lower punch baffle and tighten it.
(5) For the installation of the upper punch, wipe the upper punch with oil, install it in the upper mold holes in sequence, and install the oil collection rings one by one. At the same time, tighten the protective cover of the upper punch. After installing the mold, rotate the equipment by hand to check for any abnormal noise. Check if the mold is installed in place.
4. Install equipment components.
(1) First, install the forced feeder and tighten the screws to check if the scraper is installed properly.
(2) Install the feeder.
(3) Install the discharge.
(4) Finally, install the discharge tray and plug in the electrical equipment
(5) After the equipment is installed, rotate it by hand first. If there are no abnormalities, install the peripheral cover and prepare to turn it on.
Before any drug reaches a patient, it starts in a lab. That’s where formulas are tested, batches are checked, and quality is either confirmed or questioned. To do that work right, labs depend on the right equipment—tools that don’t just get the job done, but do it with precision. If you’re responsible for running or […]
Blister packaging is everywhere in pharma—from tablets to capsules to sample packs. It protects the product, extends shelf life, and improves patient safety. But for manufacturers, it’s more than just packaging—it’s a system built around speed, precision, and compliance. If you’re in pharma manufacturing or packaging procurement, here’s what you need to know about blister […]
If you’re deciding how to deliver a pharmaceutical or supplement product, the format you choose—liquid gels or tablets—will shape more than just how it looks. It affects how the product is made, how fast it’s absorbed, what kind of equipment you’ll need, and how the end user experiences it. Some actives work better in a […]
+86-577-67378828
canaan@chinacanaan.com