When using Coating Series, you should note some tips. Every time liquid or powder is taken, it should be distributed evenly, it should be fully dried before adding the solution again. The viscosity of the solution should not be too large, otherwise it will not be easy to distribute evenly. In the production of powder coating and mixing method is often used, the powder suspended in adhesive solution, adding rotating tablet, which can reduce the dust and simplify the working procedure. The finished coating products must be dried with low temperature, and constantly flipping, avoiding exposure and high temperature drying. Otherwise easy to make color bleeding pills. After the wind device is opened, it is forbidden to block the air blower with the hand or other things so as not to damage the blower.
Copyright © Zhejiang Canaan Technology Limited All Rights Reserved | Sitemap